Skip to Content

Smart heating on a budget! Outfitting my brother's studio

19 November 2026 by
Smart heating on a budget! Outfitting my brother's studio
Elvin Luff
| No comments yet


Radiator TRVs (valves) are terrible at regulating the temperature in a room. With a smart TRV, Home Assistant and something placed in the center of the room to get accurate temperature readings like the CTRL ONE, we're going to fix that for my brother!

Check the video, it's a great exercise in cobbling together what I had lying around. I had an old Raspberry Pi 3 - it's definitely on the very edge of what can run Home Assistant, but for a total of 2 devices it's fine. The CTRL ONE provides its temperature sensor in the center of the room, while an automation in Home Assistant syncs that temperature with the external temperature input on the Shelly BLU TRV. HA is the glue that brings two different ecosystems together (ESPHome and Shelly), and the setpoint can easily be changed via the Home Assistant app too!

Check out the CTRL ONE >>

https://www.shelly.com/products/shelly-blu-trv-single-pack

This was the TRV that I used for the project. I had this device lying around as one of the many that I have for testing, and, well... it's the "little brother" TRV, a.k.a. the hand-me-down that I was happy to give away. The hardware itself is really nice, but the real downer has to be the Bluetooth to WiFi dongle.

I was hoping the dongle was a nice optional extra, and it makes sense for someone who just wants to use the app that Shelly provides. What I didn't know until after purchasing it is that while it does support Bluetooth and you can see the data directly from within Home Assistant, the control of the device is not possible via the Home Assistant integration over Bluetooth. Someone did make a vibe-coded effort to get it supported and I did try it, but it didn't work with my exact model.

For a setup where I'm not going to be there, and the end-user wants it to just work, it didn't make sense to continue down that path. Best to just use the officially supported method, and so I plugged the dongle into a port on the Raspberry Pi to give it power and called it a day.

Sign in to leave a comment
I need testers! The THRM ONE, an OpenTherm boiler controller